Welcome to AMI Essence!
Where does the Thermo Pipe go?
It connects into the centre of the T piece and runs down to the Tri Jet Steam system.
Why doesn’t my button work?
The button on the column is to activate your AMI system – if this is not working then in the simplest of cases your battery pack might not be switched on (Located behind the back column). Want to know what would be funny, is if there wasn’t any batteries in there to start! We’ve all done it…
Why can’t I smell any essential oils yet?
You should press the activation button for roughly 10/15 seconds therefore it’s enough time for the essential oil to be melted and mixed with the steam system.
The pipe from the solenoid to the back of the filler cap needs to be cut to length so it’s straight to allow the liquid to flow through easily.
Heavy Duty Generator | FAQ
Where do I put the T piece on 6, 9, 12kW Steam Generators?
The T piece is a connector that needs to be placed as close as possible to the steam outlet so it creates enough heat to carry the oil and mix it into the steam. Hold the button for 10/15 seconds for cleaning. 10/15 seconds to hold the button for cleaning and oils.
All oils undergo a variety of tests from Gas Chromatography/ Mass Spectrometry (GC/MS) to the more standard testing of Optical rotation, Refractive index and specific gravity. But most importantly we do not get lost in the high tech side alone – AROMA is one of the most important tests; if it does not smell right, we do not buy it!